Open Frame ą48Vdc Input 1U Triple Output Industrial DC/DC Power Supply
KP-048170T1-1U (1u U Bracket)

SPECIFICATION :

• Model No.: KP-048170T1-1U; 170Watts

• Input Voltage: ą48VDC (ą36VDC ~ ą72VDC)

ENVIRONMENTAL CONDITIONS:
• Cooling: Ventilation Cooling (U Bracket Heatsink)
• Operating Temperature: 0°C ~ +55°C
• Operating Humidity: 20%~85% RH. (Non condensing)
• Storage Temperature: -20°C~+80°C
• Storage Humidity: 10%~90% RH. (Non condensing)
• Operating Altitude: 10M Below Sea level to 3000M Above Sea level

DC INPUT CHARACTERISTICS:

• Polarity Reverse Protection: Fuse Protected
• Input connector type: 30A/ 300V UL Approved 3-pin Terminal
• Input Current: 3.5A/7A(max.) @ Full Load High Line/ Low Line
• Inrush Current: Less than 30A Cold start @25°C ambient

DC OUTPUT CHARACTERISTICS:

OVERALL PERFORMANCE:
• Efficiency: 75% typical @48V DC Full Load
• Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min
• Short Circuit Protection (SCP): All output equipped with SCP (shutdown and latch off)
• Over Power Protection (OPP): Peak power protected to 130%ą10% of continuous rated power (shutdown and latch off)
• Over Voltage Protection (OVP): +5V & +12V Output Voltages

RELIABILITY:
• MTBF (Mean Time Between Failure): >100,000 hours @max. Load, 48V DC & 25°C ambient
• Safety Standards: Meet UL60950 and TüV EN60950
• EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPR22 (EN55022) Class B(CE mark)
• Dielectric Withstand: Input to Output: 1500Vac for 1 second
• Dielectric Withstand: Input to Frame ground: 1500Vac for 1 second
• Leakage Current: <0.005uA @48VDC

Output Connector specific:
• Connector Type: 25A/300V UL Approved 8-pin Terminal

Power chassis Dimension:
• 172(L) x 98(W) x 40(H) mm
or
• 6.77(W) x 3.86(L) x 1.57(H) Inches

Net Weight:
• 1.0kgs (2.2 lbs)/pc

Gross Weight:
• 1.5kgs (3.3 lbs)/pc

Packing Detail
• 8 pcs/Carton