AC Power Source DC Power Supply
Open Frame DC/DC 1u 170W 3 outputs SFX 12Vdc Input dc2dc SFX SFX 24Vdc Input dc2dc SFX Services Support FAQ RMA
Open Frame DC/DC 50W Single Output Open Frame(U Shape) DC/DC 150W Single Output Open Frame DC/DC 1u 100W ATX Open Frame DC/DC 1u 170W 2 outputs
2u 12Vdc input dc2dc ATX 2u 24Vdc input dc2dc ATX 2u 48Vdc input dc2dc ATX 2u 120Vdc input dc2dc ATX 2u 220Vdc input dc2dc ATX
1u 12Vdc input dc2dc ATX 1u 24Vdc input dc2dc ATX 1u 48Vdc input dc2dc ATX 1u 120Vdc input dc2dc ATX 1u 220Vdc input dc2dc ATX
12Vdc input dc2dc ATX PS2 24Vdc Input dc2dc ATX PS2 48Vdc Input dc2dc ATX PS2 120Vdc Input dc2dc ATX PS2 220Vdc Input dc2dc ATX PS2
 Home   Contact  Site Map Help Bookmark Us
Call 626-839-5758 to order
Open Frame DC/DC 1u 170W 3 outputs
 KP-012170T1-1U (+5V,+12V & -12V)
 KP-024170T1-1U (+5V,+12V & -12V)
 KP-048170T1-1U (+5V,+12V & -12V)

Newsletter
Subscribe to our promotions, coupons & news.
Email: 
Subscribe    
Unsubscribe



   Open Frame DC/DC 1u 100W ATX  >   KP-048100-1L  >   Open Frame (1U) DC/DC 48Vdc Input, 100Watts ATX Mini IPC Power Supply
 

Open Frame (1U) DC/DC 48Vdc Input, 100Watts ATX Mini IPC Power Supply
Product Name:Open Frame (1U) DC/DC 48Vdc Input, 100Watts ATX Mini IPC Power Supply
Availability:BackOrdered
Product Number:KP-048100-1L
Product Weight:1 lb.
Rating:

 Product Detail

    Open Frame ±48Vdc Input 1U Mini Industrial PC Power Supply
    KP-048100-1L (1u L Bracket)

SPECIFICATION :

Model No.: KP-048100-1L; 100Watts

Input Voltage: ±48VDC (±38VDC ~ ±72VDC)

ENVIRONMENTAL CONDITIONS:
• Cooling: Ventilation Cooling
• Operating Temperature: 0°C ~ +45°C

• Operating Humidity: 20%~85% RH. (Non condensing)
• Storage Temperature: -20°C~+80°C
• Storage Humidity: 10%~90% RH. (Non condensing)
• Operating Altitude: 10M Below Sea level to 3000M Above Sea level

DC INPUT CHARACTERISTICS:

Polarity Reverse Protection: Protected (Max. 100VDC)
• Input connector type: 7A/ 300V Single table type Terminal 4pin
• Input Current: 1.7A/3.2A(max.) @ Full Load High Line/ Low Line
• Inrush Current: Less than 5A Cold start @25°C ambient

DC OUTPUT CHARACTERISTICS:

Output Voltage

Regulation

Output Current

Ripple & Noise

Load

Line

Cross

Min.

Max.

+5V

±5%

±1%

±5%

0A

10A

50mV

+12V

0A

6A

100mV

+3.3V

0A

10A

50mV

-5V

-12V

±10%

0A

0.5A

100mV

+5Vsb

±5%

0A

0.5A

50mV

*The total output wattages shall not exceed 100 W.
*The max. combined output wattages of +3.3V, +5V shall not exceed 50 wattages.
*Important notice, each max. peak current can be last 5 seconds only.

OVERALL PERFORMANCE:
• Efficiency: 85% typical @48V DC Full Load
• Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min
• Short Circuit Protection (SCP): All output equipped with SCP (shutdown and latch off)
• Over Power Protection (OPP): Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
• Over Voltage Protection (OVP): +5V, +12V & +3.3V

RELIABILITY:
• MTBF (Mean Time Between Failure): >60,000 hours @max. Load, 48V DC & 25°C ambient
• Safety Standards: Meet UL60950 and TüV EN60950
• EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPR22 (EN55022) Class B(CE mark)
• Dielectric Withstand: Input to Output: 1500Vac for 1 second
• Dielectric Withstand: Input to Frame ground: 1500Vac for 1 second
• Leakage Current: <0.005uA @48VDC

Output Connector specific:
• ATX 20 Pin x 1: Molex29-01-2200 or equivalent
• +12V(P4) 4 pin x1: Molex 39-01-2040 or equivalent

Power chassis Dimension:
• 193(L) x 42(W) x 40(H) mm
or
• 7.6(W) x 1.65(L) x 1.57(H) Inches

Net Weight:
• 0.336kgs (0.74 lbs)/pc

Gross Weight:
• 0.436kgs (0.96 lbs)/pc

Packing Detail
• 8 pcs/Carton


Measurement of Carton
• 0.028 cuM (1.0 cu ft)



Show Related Products


     Home  |  Contact  |  Site Map  |  Help  |  Bookmark Us  

Security Policy       Privacy Policy       Site Map      
Copyright © 2012 KHz Powertech International All rights reserved.
Powered by EZWebCatalog