SFX 12Vdc Input dc2dc SFX SFX 24Vdc Input dc2dc SFX Services Support FAQ RMA
Redundant Power,12V DC/DC Redundant Power,24V DC/DC Redundant Power,48V DC/DC Redundant Power,120V DC/DC
2u 12Vdc input dc2dc ATX 2u 24Vdc input dc2dc ATX 2u 48Vdc input dc2dc ATX 2u 120Vdc input dc2dc ATX 2u 220Vdc input dc2dc ATX
1u 12Vdc input dc2dc ATX 1u 24Vdc input dc2dc ATX 1u 48Vdc input dc2dc ATX 1u 120Vdc input dc2dc ATX 1u 220Vdc input dc2dc ATX
12Vdc input dc2dc ATX PS2 24Vdc Input dc2dc ATX PS2 48Vdc Input dc2dc ATX PS2 120Vdc Input dc2dc ATX PS2 220Vdc Input dc2dc ATX PS2
 Home   Contact  Site Map Help Bookmark Us
Call 626-839-5758 to order
24Vdc Input dc2dc ATX PS2
 KP-024300H, 300W
 KP-024450H, 450W
 KP-024500H, 500W
 KP-024600H, 600W
 KP-024650H, 650W
 KP-024700H, 700W
 KP-024750H, 750W

Newsletter
Subscribe to our promotions, coupons & news.
Email: 
Subscribe    
Unsubscribe



   24Vdc Input dc2dc ATX PS2  >   KP-024300H, 300W  >   DC to DC, 24Vdc input, 300W ATX PS2 size
 

DC to DC, 24Vdc input, 300W  ATX PS2 size
Product Name:DC to DC, 24Vdc input, 300W ATX PS2 size
Availability:In Stock
Product Number:KP-024300H
Product Weight:5 lb.
Rating:

 Product Detail

    24V Input DC Industrial PC ATX 2.01 Switching Power Supply
    KP-024300H (PS2 Size)

SPECIFICATION :

Model No.: KP-024300H; 300Watts

Input Voltage: 24VDC ( 18VDC ~ 36VDC)

ENVIRONMENTAL CONDITIONS:
Cooling: Forced Air-cooling, 80x80x25 mm Fan x 1 (Two Ball Bearing mode)
Operating Temperature: 0 C ~ +60 C
(-20 C ~ +60 C optional )
Operating Humidity: 20%~85% RH. (Non condensing)
Storage Temperature: -20 C~+80 C
Storage Humidity: 10%~90% RH. (Non condensing)
Operating Altitude: 10M Below Sea level and 3000M Above Sea level

DC INPUT CHARACTERISTICS:

Polarity Reverse Protection: Portected (Max. 60VDC)
Input connector type: 100A/ 300V UL Approved Gold Plated Brass 1.2t/3-Pin Terminal
Input Current: 11A/22A(max.) @ Full Load High Line/ Low Line
Inrush Current: Less than 50A Cold start @25 C ambient

DC OUTPUT CHARACTERISTICS:

Output Voltage

Regulation

Output Current

Ripple & Noise

Load

Line

Cross

Min.

Max.

+5V

5%

1%

5%

0A

30A

50mV

+12V

0A

12A

120mV

+3.3V

0A

15A

50mV

-5V

0A

1A

50mV

-12V

8%

0A

0.8A

120mV

+5Vsb

5%

0A

2A

50mV

*The total output wattages shall not exceed 300 W.
*The max. combined output wattages of +3.3V & +5V shall not exceed 150 wattages.

OVERALL PERFORMANCE:
Efficiency: 77% typical @24V DC Full Load
Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min
Short Circuit Protection (SCP): All output equipped with SCP (shutdown and latch off)
Over Power Protection (OPP): Peak power protected to 130% 10% of continuous rated power (shutdown and latch off)
Over Voltage Protection (OVP): +5V, +12V & +3.3V

RELIABILITY:
MTBF (Mean Time Between Failure): >100,000 hours @max. Load, 24V DC & 25 C ambient
Safety Standards: Meet UL60950 and T V EN60950
EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPR22 (EN55022) Class A(CE
mark)
Dielectric Withstand: Input to Output: 1500Vac for 1 second
Dielectric Withstand: Input to Frame ground: 1500Vac for 1 second
Leakage Current: <0.005uA @24VDC

Output Connector specific:
ATX 24 Pin x 1: Molex29-01-2240 or equivalent
+12V(P4) 4 pin x1: Molex 39-01-2040 or equivalent
HDD, DVD 4 pin x7: Molex 8981-04P or equivalent
FDD 4 pin x1: AMP171822-4 or equivalent
Serial ATA x2: Molex 675820000 or equivalent
Process EPS 8 pin x1: Molex 39-01-2080 or equivalent

Standard Output Cable Length:
550mm (21.65 Inches)

Power chassis Dimension:
150(W) x 140(D) x 86(H) mm
or
5.9(W) x 5.51(D) x 3.38(H) Inches

Net Weight:
2kgs (4.4 lbs)/pc

Gross Weight:
2.2kgs (4.84 lbs)/pc

Packing Detail
8pcs/Carton


Measurement of Cartonn
0.046 cuM (1.61cu ft)



Show Related Products


     Home  |  Contact  |  Site Map  |  Help  |  Bookmark Us  

Security Policy       Privacy Policy       Site Map      
Copyright © 2019 KHZ Powertech International All rights reserved.
Powered by EZWebCatalog