Open Frame DC/DC Converter, ą12V Input/Single Output Power Supply
KP-012050-XX ("XX" : Optional Single Output Voltage)
SPECIFICATION :
Model No.: KP-012050-XX; 50Watts
Input Voltage: ą12VDC (ą9VDC ~ ą17VDC)
ENVIRONMENTAL CONDITIONS:
Cooling: Nature convertion with L bracket heatsink
Operating Temperature: 0°C ~ +65°C
Operating Humidity: 20%~85% RH. (Non condensing)
Storage Temperature: -20°C~+85°C
Storage Humidity: 10%~90% RH. (Non condensing)
Operating Altitude: 10M Below Sea level and 3000M Above Sea level
DC INPUT CHARACTERISTICS:
Polarity
Reverse Protection: Auto recovery
Input connector type: 15A/ 300V UL Approved 2-Pin Terminal
Input Current: 10A/39A(max.) @ Full Load & Low Line
Inrush Current: Less than 10A Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS:
Output Voltage |
Regulation |
Output Current |
Ripple & Noise |
Load |
Line |
Cross |
Min. |
Max. |
Optional |
ą5% |
ą1% |
ą5% |
0A |
Open |
|
*The total output
wattages shall not exceed 50 Watts.
|
OVERALL PERFORMANCE:
Efficiency: 65% typical @12V DC Full Load
Short Circuit Protection (SCP): All output equipped with SCP (shutdown and
latch off)
Over Power Protection (OPP): Peak power protected to 130%ą10% of continuous
rated power (shutdown and latch off)
Over Voltage Protection (OVP): +130% of each output voltage.
RELIABILITY:
MTBF (Mean Time Between Failure): >75,000 hours @max. Load, 12V DC & 25°C
ambient
Safety Standards: Meet UL60950 and TüV EN60950
EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPR22 (EN55022)
Class B(CE
mark)
Dielectric Withstand: Input to Output: 1500Vac for 1 second
Dielectric Withstand: Input to Frame ground: 1500Vac for 1 second
Leakage Current: <0.005mA @250Vac
Output Connector specific:
Connector type: 15A/300V UL Approved 2-pin Terminal
Power Chassis Dimension:
106(L) x 59(W) x 40(H) mm
or
4.17(L) x 2.32(W) x 1.57(H) Inches
Net Weight:
0.17kgs (0.38 lbs)/pc
Gross Weight:
0.25kgs (0.55 lbs)/pc
Packing Detail
20pcs/Carton
Measurement of Carton
0.033 cuM (1.2cu ft)
