SPECIFICATION :
•
Model No.: KP-048170D2-1U; 170Watts
•
Input Voltage: ±48VDC (±36VDC ~ ±72VDC)
ENVIRONMENTAL CONDITIONS:
• Cooling: Ventilation Cooling (U Bracket Heatsink)
• Operating Temperature: 0°C ~ +55°C
• Operating Humidity: 20%~85% RH. (Non condensing)
• Storage Temperature: -20°C~+80°C
• Storage Humidity: 10%~90% RH. (Non condensing)
• Operating Altitude: 10M Below Sea level to 3000M Above Sea level
DC INPUT CHARACTERISTICS:
• Polarity
Reverse Protection: Fuse Protected
• Input connector type: 30A/ 300V UL Approved 3-pin Terminal
• Input Current: 3A/6A(max.) @ Full Load High Line/ Low Line
• Inrush Current: Less than 30A Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS:
|
Output Voltage |
Regulation |
Output Current |
Ripple & Noise |
|
Load |
Line |
Cross |
Min. |
Max. |
|
+24V |
±5% |
±1% |
±5% |
0A |
4A |
240mV |
|
-24V |
0A |
3A |
240mV |
|
*The total output
wattages shall not exceed 170 W.
|
OVERALL PERFORMANCE:
• Efficiency: 85% typical @48V DC Full Load
• Short Circuit Protection (SCP): All output equipped with SCP (shutdown and
latch off)
• Over Power Protection (OPP): Peak power protected to 130%±10% of continuous
rated power (shutdown and latch off)
• Over Voltage Protection (OVP): +24V, -24V
RELIABILITY:
• MTBF (Mean Time Between Failure): >100,000 hours @max. Load, 48V DC & 25°C
ambient
• Safety Standards: Meet UL60950 and TüV EN60950
• EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPR22 (EN55022)
Class B(CE mark)
• Dielectric Withstand: Input to Output: 1500Vac for 1 second
• Dielectric Withstand: Input to Frame ground: 1500Vac for 1 second
• Leakage Current: <0.005uA @48VDC
Output Connector specific:
• Connector Type: 25A/300V UL Approved 8-pin Terminal
Power chassis Dimension:
• 172(L) x 98(W) x 40(H) mm
or
• 6.77(W) x 3.86(L) x 1.57(H) Inches
Net Weight:
• 1.0kgs (2.2 lbs)/pc
Gross Weight:
• 1.5kgs (3.3 lbs)/pc
Packing Detail
• 8 pcs/Carton
Measurement of Carton
• 0.033 cuM (1.15 cu ft)
