SPECIFICATION :
•
Model No.: KP-012100-1L; 100Watts
•
Input Voltage: ±12VDC (±9VDC ~ ±17VDC)
ENVIRONMENTAL CONDITIONS:
• Cooling: Ventilation Cooling
• Operating Temperature: 0°C ~ +45°C
• Operating Humidity: 20%~85% RH. (Non condensing)
• Storage Temperature: -20°C~+80°C
• Storage Humidity: 10%~90% RH. (Non condensing)
• Operating Altitude: 10M Below Sea level to 3000M Above Sea level
DC INPUT CHARACTERISTICS:
• Polarity
Reverse Protection: Protected (Max. 24VDC)
• Input connector type: 7A/ 300V Single table type Terminal 4pin
• Input Current: 7A/13A(max.) @ Full Load High Line/ Low Line
• Inrush Current: Less than 15A Cold start @25°C ambient
DC OUTPUT CHARACTERISTICS:
|
Output Voltage |
Regulation |
Output Current |
Ripple & Noise |
|
Load |
Line |
Cross |
Min. |
Max. |
|
+5V |
±5% |
±1% |
±5% |
0A |
10A |
50mV |
|
+12V |
0A |
6A |
100mV |
|
+3.3V |
0A |
10A |
50mV |
|
-5V |
|
|
|
|
-12V |
±10% |
0A |
0.5A |
100mV |
|
+5Vsb |
±5% |
0A |
0.5A |
50mV |
|
*The total output
wattages shall not exceed 100 W.
*The max. combined output wattages of +3.3V, +5V shall not exceed 50 wattages.
*Important notice, each max. peak current can be last 5 seconds only.
|
OVERALL PERFORMANCE:
• Efficiency: 85% typical @12V DC Full Load
• Power Good Signal: TTL Compatible signal, on delay 100~500ms, off delay 1ms min
• Short Circuit Protection (SCP): All output equipped with SCP (shutdown and
latch off)
• Over Power Protection (OPP): Peak power protected to 130%±10% of continuous
rated power (shutdown and latch off)
• Over Voltage Protection (OVP): +5V, +12V & +3.3V
RELIABILITY:
• MTBF (Mean Time Between Failure): >60,000 hours @max. Load, 12V DC & 25°C
ambient
• Safety Standards: Meet UL60950 and TüV EN60950
• EMI Compatibility (EMC) Standard: FCC Part 15 Class B, CISPR22 (EN55022)
Class B(CE mark)
• Dielectric Withstand: Input to Output: 1500Vac for 1 second
• Dielectric Withstand: Input to Frame ground: 1500Vac for 1 second
• Leakage Current: <0.005uA @12VDC
Output Connector specific:
• ATX 20 Pin x 1: Molex29-01-2200 or equivalent
• +12V(P4) 4 pin x1: Molex 39-01-2040 or equivalent
Power chassis Dimension:
• 193(L) x 42(W) x 40(H) mm
or
• 7.6(W) x 1.65(L) x 1.57(H) Inches
Net Weight:
• 0.336kgs (0.74 lbs)/pc
Gross Weight:
• 0.436kgs (0.96 lbs)/pc
Packing Detail
• 8 pcs/Carton
Measurement of Carton
• 0.028 cuM (1.0 cu ft)
